Ersa Hybrid Rework System HR 550
High Performance Rework for Professionals!
The newly developed Ersa Hybrid Rework System HR 550 offers high performance for professionals - with camera and software-assisted asssembly placement, hig-precision mechanics and a completely new operator-friendly user interface.
Over the past two decades, rework and repair of electronic assemblies has been one of the most exciting and challenging undertakings in the industry. Ersa rework systems have proven themselves to be the undisputed leaders in handling the largest variety of rework applications. From the smallest 0201 up to the largest SMT connector (120 mm), from SMT Flip-Chips to THT Pin Grid Arrays, from BGA on flex circuit to stacked BGAs and from metal shields to plastic processor sockets, the safe Ersa technology handles it all.
 |
The Ersa hybrid rework system HR 550 addresses all users with highest requirements in terms of
precision and process safety in electronic assembly rework applications. The HR 550 provides a 1,500 W high performance hybrid heating element to desolder and solder SMT components up to dimensions of 70 x 70 mm! A 2,400 W infrared bottom heater in three heating zones guarantees homogeneous bottom side preheating of the complete assembly. Noncontact and contacting temperature sensing directly at the component as well as an optimized process control effect in ideal removal and installation processes of various component types.
A high precision vacuum device, integrated into the units heating head, operates component removal and placement. Stepper motors for the exchangeable hybrid heating head and the vacuum pipette supply exact movement during component desoldering and installation. An integrated force sensor recognizes when component and printed circuit board are contacted. Operators of this unit will be pleased to use this practical rework unit with ergonomically control elements and the completely new computer aided component adjustment by means of brilliant high definition camera images.
 |
Above all the HR 550 is prepared for operation with the Ersa Dip&Print station as well as for micro components and removal of residual solder. With the hybrid rework system HR 550 Ersa confirms its leading position in rework technology - with a highly performing device that supports rework professionals at the highest level. Simply fascinating in every way!
Technical Highlights Ersa HR 550:
- 1,500 W hybrid heating head
- Large-area IR bottom heating in 3 heating zones (2,400 W)
- High-resolution cameras for placement and process control
- Computer aided component adjustment
- Ergonomically arranged operating elements on the station
- Newly developed userfriendly software