VERSAFLOW 4 – Making The Best Even Better!
The next generation of the world-wide leading inline selective soldering system sets new standards
With the VERSAFLOW 4/55, Ersa present the next generation of the world-wide leading VERSAFLOW inline selective soldering system, offering a full range of new features: the new, intuitively operable, award- winning user interface ERSASOFT 5.0, motorized adjustable Y-axis for fluxer- and solder module, Y- and Z-variability, full convection preheaterand a 508 x 508 mm usable process area for inline production. Through the perfect interaction of all system components, the process flexibility is once more increased and the productivity is further optimized.
Ersa’s new high-end VERSAFLOW 4/55 is the ideal selective soldering system for large and complex board assemblies in electronic manufacturing. Because of its modukar design, and depending on the applications and the demands placed on the system, additional flux-, preheat- and solder modules can be integrated. All modules run aautonomously through their configured programs. Set-up times and operator interventions are not required, which means that the system is always operating at the highest level of productivity and process flexibility. At Productronica, Ersa will introduce the VERSAFLOW 4/55 with the new Augmented-Reality Tool Ersa IMAGESOFT, which allows, with a tablet PC, 3D-views of the complete system – without having to open the system enclosure!
Save on operating material, increase throughput
A soldering expert will find inside the enclosure of the 4/55 an environment densely packed with innovations, starting with the infeed section: The “bad-board-recognition” recognizes whether in a multiple-up board each board needs to be soldered. If individual boards are not populated, the system will recognize this and not process these boards, saving process material and increasing the throughput. The fluxer module can be equipped with up to four multi-drop fluxer heads to simultaneously flux four PCB’s. For the preheat section, Ersa now offers newly developed, rpm-controlled full-convection upper heater modules. With this superior technology, components on the topside of the board assembly receive the best possible thermal protection while being gently but efficiently warmed up.
Innovative functions have also been added to the solder modules: The options Y- and Z- variable, previously separated in dual bath modules, are in the VERSAFLOW 4/55 combined and their parameters can be stored in solder programs. The parameter Y-variable adjusts the distance of the two solder bath / solder nozzles automatically to the distance of the individual PCB’s in the multiple-up assembly. Different multiple-ups with different offsets can be processed in mixed operation - without manual intervention into the solder module and the attendant downtime. The option Y-variable is also available for the fluxer module. The Z-variable option serves to solder on one PCB with two different sized nozzles. With the new design, the solder bath not in operation can now be lowered to up to 60 mm below the operating level, to allow soldering between very tall components using only one nozzle.
Perfect process safety, perfect soldering quality
To monitor the condition of the wettable surfaces of the nozzles while in operation, an IP-camera is installed in the VERSAFLOW 4/55, which controls, looking from varying angles, the process safety of the solder nozzle, and, if called for, starts the activation process for the nozzle surface. The camera also monitors and controls the solder wave height. An additional highlight in the process monitoring is the continuous monitoring of the rest-oxygen level at the solder nozzle – the protective atmosphere is an important parameter for achieving superior solder results. Aside from these hardware improvements, the operator was not neglected and user friendly handling of the system was an important concern: The completely new, intuitively operable system software ERSASOFT 5 is based on the newest Microsoft technology and operated via a 24” touchscreen. It also permits complete process monitoring and visualization, and it reduces the time required to configure process parameters. Complete process data management, documentation of all process- and system relevant data as well as an interface for the integration of traceability as per ZVEI- protocol respectively MES- systems are important features. Brought to the point: With this VERSAFLOW 4/55, Ersa defines the future of the solder technology!